PZW Hook Latch and Deadbolt Mortise Lock for Profile Sliding Door
PZW Hook Latch and Deadbolt Mortise Lock for Profile Sliding Doors – 72 mm Centres
Mechanical mortise lock for profile-frame sliding doors, featuring a key-operated latch retraction function, steel hook latch and deadbolt, single-turn locking and a 24 mm nickel-silver painted faceplate.
The APS PZW Hook Latch and Deadbolt Mortise Lock is a specialised locking solution for profile-frame sliding doors requiring reliable mechanical locking and a closing function adapted to sliding-door construction.
The lock combines a hook latch with a separate deadbolt. Both components are made of steel and designed for the mechanical requirements of suitable profile-frame sliding doors.
The PZW version with key-operated latch retraction allows the designated lock function to be operated through a compatible Euro profile cylinder. The retraction mechanism must be compatible with the door hardware and cylinder combination used.
With 72 mm centres, a 243 mm lock height and a 24 mm square-ended faceplate with a nickel-silver painted finish, the lock is suitable for appropriately prepared profile-frame sliding doors.
Its universal configuration allows installation on DIN left-hand and DIN right-hand doors.
Specifically Designed for Profile-Frame Sliding Doors
This mortise lock is intended for sliding doors with suitable frame profiles.
Typical applications include:
- Aluminium profile-frame sliding doors
- Steel profile-frame sliding doors
- Sliding doors with compatible lock housings
- Sliding-door constructions requiring key-operated latch retraction
- Replacement of existing hook latch and deadbolt locks with matching installation dimensions
Suitability depends on the door and frame construction, the existing strike plate or receiver and the installation dimensions.
Steel Hook Latch and Deadbolt
The lock features two mechanical closing components:
Hook Latch
The hook latch provides the designated closing function for a compatible profile-frame sliding door. Its hook-shaped construction is designed to engage with a suitable strike or receiver.
Separate Deadbolt
The additional deadbolt provides the mechanical locking function. It is operated through a compatible Euro profile cylinder.
Both the hook latch and the deadbolt are manufactured from steel.
For correct operation, the locking components must engage properly with their corresponding receivers in the door frame.
Single-Turn Locking
The mortise lock features a single-turn deadbolt.
Locking is achieved with one turn of the key through the appropriate Euro profile cylinder.
The single-turn design provides straightforward mechanical operation for suitable sliding-door installations.
PZW Version with Key-Operated Latch Retraction
This lock is designed as a Euro profile cylinder lock with key-operated latch retraction (PZW).
The retraction mechanism allows the designated hook latch function to be operated through the cylinder.
This enables key operation of the lock in suitable sliding-door constructions.
The exact operation depends on the hardware configuration and the design of the sliding door.
Square-Ended Faceplate with Nickel-Silver Painted Finish
The lock features a 24 mm wide, square-ended faceplate with a nickel-silver painted finish.
Specifications:
- Faceplate finish: Nickel-silver painted
- Faceplate width: 24 mm
- Faceplate shape: Square-ended
The painted surface provides a uniform appearance and surface protection.
When replacing an existing lock, the faceplate dimensions, shape and fixing points must match the door construction.
Universal DIN Left-Hand and Right-Hand Compatibility
The APS PZW Hook Latch and Deadbolt Mortise Lock is designed for both DIN handing directions.
It can be used on compatible DIN left-hand and DIN right-hand profile-frame sliding doors.
The universal configuration simplifies product selection for new installations and replacement applications.
Key Features
- For profile-frame sliding doors: Designed for compatible sliding-door constructions
- PZW configuration: Euro profile cylinder operation with key-operated latch retraction
- Steel hook latch: Provides the designated closing function
- Steel deadbolt: Mechanical locking
- Single-turn deadbolt: Locking with one turn of the key
- Nickel-silver painted faceplate: Uniform surface finish
- 24 mm faceplate width: For corresponding lock housings
- Square-ended faceplate: Straight rectangular ends
- 72 mm centres: Distance between the designated operating axes
- 243 mm lock height: For matching installation dimensions
- Universal DIN left/right: Suitable for both handing directions
Technical Specifications
- Product: APS PZW Hook Latch and Deadbolt Mortise Lock
- Lock type: Hook latch and deadbolt mortise lock
- Door type: Profile-frame sliding doors
- Cylinder operation: Euro profile cylinder with key-operated latch retraction (PZW)
- Hook latch: Steel
- Deadbolt: Steel
- Deadbolt operation: Single-turn
- Faceplate finish: Nickel-silver painted
- Faceplate width: 24 mm
- Faceplate shape: Square-ended
- Centres (B): 72 mm
- Lock height (C): 243 mm
- DIN handing: DIN left-hand and DIN right-hand
Selection and Installation Information
Before ordering, please compare the technical characteristics and dimensions of your existing lock with the specified product details.
Important factors include:
- Correct backset and cylinder position
- 72 mm centres
- 243 mm lock height
- 24 mm faceplate width
- Square-ended faceplate
- Position of the fixing points
- Dimensions of the existing lock housing
- Compatibility with the Euro profile cylinder
- Suitable strike or receiver for the hook latch and deadbolt
- Compatibility of the latch retraction mechanism with the door hardware and construction
Important: A hook latch and deadbolt lock for sliding doors is not directly interchangeable with a conventional mortise lock designed for hinged doors. The hook latch and corresponding receiver must be compatible with the sliding-door construction.
Compatible with APS SIRIUS Cylinders
The mortise lock is designed for use with a suitable Euro profile cylinder.
The cylinder controls key access and operates the locking mechanism or the designated latch retraction function.
At APS HOME SECURITY, you will also find our own APS SIRIUS Euro profile cylinders and locking systems, which can be combined with this lock where mechanically compatible.
This allows suitable profile-frame sliding doors to be integrated into existing or new locking systems.
Order Your Hook Latch and Deadbolt Mortise Lock Online
The APS PZW Hook Latch and Deadbolt Mortise Lock provides a functional mechanical locking solution for compatible profile-frame sliding doors.
The steel hook latch and deadbolt, single-turn locking, 72 mm centres, 243 mm lock height and 24 mm square-ended nickel-silver painted faceplate make it a suitable choice for new installations and replacing compatible sliding-door locks.
APS HOME SECURITY – Professional Locking Technology for Profile-Frame Sliding Doors.
Note: Depending on availability, the supplied product may come from different manufacturers. The specified technical characteristics and dimensions remain the determining factors.
Manufacturers by Conviction. Since 2013.
APS HOME SECURITY develops and manufactures its own locking systems and customised master key systems. Discover our manufacturing expertise, our product ranges and the know-how behind our security solutions.
Contact us
We will contact you as soon as possible.
Please try again later.
















