KFV Multipoint Repair Lock with Round Bolts – Modular Complete Kit, 92 mm
KFV Multipoint Repair Lock with Round Bolts – Modular Complete Kit, 92 mm Centres
Complete modular KFV repair system for multipoint locks with round bolts. The kit combines the three-piece stainless steel RSG RB 1300SG repair faceplate assembly with the RB 1000SL replacement main lock case featuring a Softlock latch. All lock and faceplate components belonging to the kit are included. The backset and faceplate width are selected when ordering.
The KFV multipoint repair lock with round bolts provides a flexible and economical solution for repairing and restoring defective multipoint locking systems on house and apartment entrance doors.
The system is particularly suitable for situations where an identical replacement multipoint lock is no longer available or where the existing locking mechanism needs to be replaced with an adaptable repair solution.
Thanks to its modular design, the repair system can be used on suitable doors regardless of the original lock manufacturer.
It is designed for door heights from 1,625 to a maximum of 2,400 mm.
Complete Kit – Main Lock Case and Three-Piece Faceplate Assembly Included
This product includes the complete KFV repair kit with the main lock case and three-piece repair faceplate assembly.
Unlike separately sold replacement main lock cases, this product already includes all three faceplate sections and both additional round-bolt locking cases.
The complete kit consists of:
- Upper faceplate section with round-bolt locking case
- Centre faceplate section with KFV RB 1000SL replacement main lock case
- Lower faceplate section with round-bolt locking case
The main lock case features a Softlock latch and a two-turn, key-operated locking mechanism.
The two additional round-bolt locking points are positioned above and below the main lock case.
There is no need to order the main lock case or the repair faceplate assembly separately – both are already included in this complete kit.
Modular Repair System – On-Site Adaptation Required
Important: This multipoint lock is supplied as a modular repair system and must be individually adapted to the existing door during installation.
The three-piece faceplate assembly allows flexible adaptation to different door dimensions and installation conditions.
The individual faceplate sections must be adapted to the existing door measurements on site, positioned and professionally connected.
This is not a multipoint lock that has already been cut to the exact door height and is ready to install without modification.
The necessary adaptation work forms part of the installation and must be carried out by the installer.
This makes the system particularly suitable for repairs where a conventional replacement multipoint lock with identical dimensions is no longer available.
Round-Bolt Locking with Two Additional Locking Points
The KFV RSG RB 1300SG repair system features round-bolt locking with two additional locking points.
The three-piece repair faceplate assembly includes:
- 1 round-bolt locking case above the main lock case
- 1 round-bolt locking case below the main lock case
Each additional locking case has a case height of 130 mm.
When locked, the round bolts engage with the corresponding keeps in the door frame.
During installation, it must be ensured that the existing or newly adapted keeps are suitable for this locking type.
Important installation dimension: The minimum distance between the main lock's square spindle follower and an additional locking point is 690 mm.
This dimension must be taken into account when planning and adapting the multipoint repair lock.
Technical Specifications
- Manufacturer: KFV
- Product type: Modular multipoint repair lock supplied as a complete kit
- Repair faceplate assembly: KFV RSG RB 1300SG
- Replacement main lock case: KFV RB 1000SL
- Centre distance: 92 mm
- Square spindle follower: 10 mm
- Backset: Selectable when ordering
- Faceplate width: Selectable when ordering
- Locking type: Round bolts
- Additional locking points: 2
- Arrangement: One round-bolt locking case above and one below the main lock case
- Height of additional locking cases: 130 mm
- Minimum distance from spindle follower to additional locking point: 690 mm
- Faceplate material: Stainless steel
- Locking mechanism: Two-turn
- Operation: Key-operated
- Latch: Softlock latch
- Door handing: Suitable for DIN right-hand and DIN left-hand doors
- Intended door height: 1,625–2,400 mm
- Design: Three-piece repair system, adaptable on site
Complete Package Contents
You receive the complete repair system with the following components:
- 1 × KFV upper faceplate section including round-bolt locking case
- 1 × KFV lower faceplate section including round-bolt locking case
- 1 × KFV centre faceplate section including RB 1000SL replacement main lock case with Softlock latch
- 1 × additional offset Softlock latch
- 1 × reducing sleeve from 10 to 8 mm
- 3 × rivets
- 3 × screws
The main lock case, all three faceplate sections and both round-bolt locking cases are included in the package.
There is no need to order the replacement main lock case or repair faceplate assembly separately with this complete kit.
Advantages of the KFV Complete Repair Kit
- Everything in one kit: Main lock case, three-piece stainless steel faceplate assembly and both round-bolt locking cases included.
- Round-bolt locking: Two additional locking points above and below the main lock case.
- Modular design: Individual adaptation to the existing door during installation.
- Manufacturer-independent repair solution: For compatible multipoint locks from different manufacturers.
- Economical restoration: A suitable repair solution may avoid replacing the entire door or requiring expensive custom-made components.
- Softlock latch: Designed for quieter door closing.
- Universal DIN design: Suitable for DIN left-hand and DIN right-hand doors.
- Individual product selection: Backset and faceplate width are specified when ordering.
Important Selection and Installation Information
Before ordering, the existing door and its installation conditions must be checked.
Particular attention should be paid to the following:
- Select the appropriate backset
- Select the appropriate faceplate width
- 92 mm centre distance
- 10 mm square spindle follower
- Door height between 1,625 and 2,400 mm
- Minimum distance of 690 mm between the spindle follower and an additional locking point
- Position and design of the existing strike plates or door frame components
- Compatibility of the keeps with round bolts
- Necessary modifications to the door and door frame
The manufacturer-independent design does not mean that the system can be installed in every door without modification.
The individual faceplate sections must be adapted to the existing door dimensions on site during installation.
In particular, when converting from a different locking type to round bolts, it is necessary to check whether the existing keeps are suitable or need to be modified or replaced.
Depending on the existing door, additional work on the strike plates or door frame components may be necessary.
Installation should be carried out by a specialist company or a suitably qualified person using appropriate tools.
Detailed installation instructions will be available to download after purchase.
Order the KFV Multipoint Repair Lock with Round Bolts Online
With the KFV RSG RB 1300SG / RB 1000SL multipoint repair lock, APS HOME SECURITY offers a complete, modular and adaptable repair solution for house and apartment entrance doors.
Simply select the appropriate backset and your preferred faceplate width.
You receive the complete KFV repair kit including the main lock case, three-piece stainless steel faceplate assembly, two round-bolt locking cases and the listed accessories.
Please note: The system must be individually adapted to the existing door during installation.
APS HOME SECURITY – Your supplier for KFV multipoint locks, modular repair systems and professional locking technology.
Manufacturers by Conviction. Since 2013.
APS HOME SECURITY develops and manufactures its own locking systems and customised master key systems. Discover our manufacturing expertise, our product ranges and the know-how behind our security solutions.
Contact us
We will contact you as soon as possible.
Please try again later.
















