APS PZ Mortise Deadbolt Lock
APS PZ Mortise Deadbolt Lock – Double-Turn, 55 mm Backset, Nickel-Silver Painted Finish
Mortise deadbolt lock for interior residential doors, designed for Euro profile cylinders (PZ), featuring a double-turn metal deadbolt and a 20 mm square-ended faceplate with a nickel-silver painted finish. Suitable for DIN left-hand and right-hand doors.
The APS PZ Mortise Deadbolt Lock provides a practical and robust locking solution for residential interior doors requiring reliable mechanical locking with a Euro profile cylinder.
The lock features a double-turn metal deadbolt, operated by turning the key twice.
With a 55 mm backset (A), a 160 mm lock case height (C) and a 20 mm wide, square-ended faceplate, it is suitable for appropriately prepared doors and for replacing existing mortise deadbolt locks with matching installation dimensions.
The nickel-silver painted faceplate provides a discreet metallic appearance.
Thanks to its universal DIN left-hand and right-hand compatibility, the lock can be installed regardless of door handing, provided the mounting arrangement is compatible.
Mortise Deadbolt Lock for Interior Residential Doors
The APS PZ mortise deadbolt lock is designed for use in suitable residential interior doors.
Unlike a conventional mortise lock with both a latch and a deadbolt, a deadbolt-only lock provides mechanical locking exclusively through the deadbolt.
It is therefore particularly suitable for doors that do not require a separate latch function or are held closed by another mechanism.
Typical applications include:
- Residential interior doors
- Interior doors requiring additional locking
- Doors operated by a Euro profile cylinder
- Replacement of existing mortise deadbolt locks
- Repair and refurbishment of existing door locking systems
- New installations with matching mounting dimensions
- DIN left-hand and DIN right-hand doors
Suitability depends on the door and frame construction and the available installation dimensions.
For Euro Profile Cylinders (PZ)
The lock is designed for use with a Euro profile cylinder (PZ).
Locking is operated using a suitable profile cylinder and its corresponding key.
The mortise deadbolt lock can therefore be integrated into an existing locking system, provided the technical requirements are met.
When selecting a cylinder, particular attention should be paid to the door thickness, the fittings used and the required cylinder length.
Double-Turn Metal Deadbolt
The APS mortise deadbolt lock features a double-turn metal deadbolt.
The deadbolt is operated through two turns of the key.
This design allows the deadbolt to be operated in two stages for mechanical locking of the door.
The metal deadbolt forms the central locking component of the lock.
For reliable operation, the deadbolt and the corresponding strike plate must be correctly matched.
Nickel-Silver Painted Faceplate
The lock features a nickel-silver painted faceplate.
The painted finish gives the visible faceplate a silver-coloured metallic appearance.
This finish is suitable for many common residential interior doors and can be visually combined with different door fittings.
The term "nickel-silver painted" describes the surface finish and does not mean that the faceplate is made from a nickel silver alloy.
Square-Ended Faceplate – 20 mm Wide
The APS mortise deadbolt lock features a 20 mm wide faceplate with square ends.
Its straight, angular design is suitable for appropriately prepared faceplate recesses in the door edge.
When replacing an existing mortise lock, the faceplate shape and width should be carefully checked.
A square-ended faceplate may not directly replace a rounded faceplate without adjustments to the existing recess.
Backset (A): 55 mm
The lock has a 55 mm backset (A).
This measurement represents the distance from the front edge of the faceplate to the centre of the Euro profile cylinder.
It is an important selection criterion when replacing existing mortise deadbolt locks.
The backset should be checked before ordering, particularly for existing doors.
Lock Case Height (C): 160 mm
The lock case height (C) is 160 mm.
This measurement is important for compatibility with the existing lock pocket inside the door leaf.
When replacing a lock, the lock case dimensions and existing installation arrangement should be carefully compared.
Universal DIN Left-Hand and Right-Hand Compatibility
The mortise deadbolt lock is suitable for DIN left-hand and DIN right-hand doors.
As it is a deadbolt-only lock without a conventional lever-operated latch, no latch handing adjustment is required.
It can therefore be installed on either left-hand or right-hand doors, provided the installation is compatible.
A separate version for each door handing configuration is not required.
Key Features
- Mortise deadbolt lock: For suitable residential interior doors
- PZ version: For Euro profile cylinders
- Double-turn deadbolt: Two-turn locking operation
- Metal deadbolt: Robust mechanical locking component
- Nickel-silver painted faceplate: Silver-coloured metallic appearance
- Faceplate width: 20 mm
- Faceplate shape: Square-ended
- Backset (A): 55 mm
- Lock case height (C): 160 mm
- DIN left-hand and right-hand: Universal compatibility
- Repair and replacement: For compatible existing lock installations
Technical Specifications
- Product: APS PZ Mortise Deadbolt Lock
- Product type: Mortise deadbolt lock
- Application: Residential interior doors
- Cylinder type: Euro profile cylinder (PZ)
- Deadbolt: Metal
- Deadbolt operation: Double-turn
- Faceplate finish: Nickel-silver painted
- Faceplate shape: Square-ended
- Faceplate width: 20 mm
- Backset (A): 55 mm
- Lock case height (C): 160 mm
- Door handing: DIN left-hand and DIN right-hand
- Installation type: Mortise installation
- Use: New installation, repair and replacement
Selection and Installation Information
Before ordering, please check the existing door, lock pocket and installation dimensions.
Important factors include:
- Backset (A) of 55 mm
- Lock case height (C) of 160 mm
- Faceplate width of 20 mm
- Square-ended faceplate shape
- Position and spacing of fixing holes
- Compatibility with a suitable Euro profile cylinder
- Required cylinder length
- Position of the deadbolt
- Compatibility with the existing strike plate
- Door thickness and existing lock pocket
For reliable operation, the mortise deadbolt lock, profile cylinder, strike plate and door and frame construction must be correctly matched.
Important: The APS PZ mortise deadbolt lock provides a deadbolt-only locking function. It therefore cannot necessarily replace a conventional mortise lock equipped with a lever-operated latch.
A Euro profile cylinder is not explicitly included in the specified package contents and should be selected separately if required.
Order the APS PZ Mortise Deadbolt Lock Online
The APS PZ Mortise Deadbolt Lock offers a practical solution for mechanically locking suitable residential interior doors.
With its double-turn metal deadbolt, 20 mm square-ended faceplate with nickel-silver painted finish, 55 mm backset and 160 mm lock case height, it is suitable for compatible new installations and replacing existing deadbolt locks.
Its universal DIN left-hand and right-hand compatibility simplifies selection and installation.
APS HOME SECURITY – Professional Locking Technology for Doors and Access Systems.
Manufacturers by Conviction. Since 2013.
APS HOME SECURITY develops and manufactures its own locking systems and customised master key systems. Discover our manufacturing expertise, our product ranges and the know-how behind our security solutions.
Contact us
We will contact you as soon as possible.
Please try again later.
















